cabinet-category-image

WALK-IN COOLERS & WALK-IN FREEZERS



service-company-locator-button

master-chill-roll-in-family

Poor cooling techniques are a major cause of foodborne illness. To avoid contamination, food must be cooled through the danger zone of 140°F to 40°F in less than four hours. Master-Chill blast chillers/freezers are designed to chill product to under 40°F in 90 minutes or less improving food safety by minimizing microbial activity.

Master-Chill high capacity roll in and pass thru blast chillers and freezers may be used as stand-alone units or incorporated into a larger walk in layout. Four-inch thick polyurethane insulated panels ensure chilling or freezing efficiency and stainless steel racks are included to accommodate storage needs. Each rack accommodates (26) 12" x 20" x 2-1/2" pans, two per each of 13 ledges.

 Standard Features
  • Stainless steel interior and exterior for a durable finish inside and out
  • Full-length evaporator coils and vertical fan towers provide evenly distributed cooling throughout the blast chiller/freezer
  • The surface mounted electronic 
    control system is easily accessible and can be relocated if necessary. 
    Full-length evaporator coils and vertical fan towers provide evenly distributed cooling throughout the blast chiller/freezer.
  • Three food temperature probes with sequential readout display are 
    supplied with the MCR-33-101 roll-in model, six probes are provided with the MCR-33-102 pass-thru
  • 4" thick panels with CFC-free polyurethane foamed-in-place insulation for highly efficient, green friendly insulation
  • 30" x 78" flush mounted polyurethane foamed door for a dependable seal
  • 36" high 16 ga. stainless steel kickplate on door exterior for added protection
  • Door gasket heater to prevent icing on doors
  • Meets HACCP (Hazard Analysis Critical Control Point) standards for assurance that the unit meets requirements for storage of cooked foods not immediately consumed
     

Products

Click on image or model number below for additional information.
MCR-33-101
MCR-33-101
Description: Roll-In Blast Chiller/Freezer
Length: 70" (1778mm)
Depth: 52" (1194mm)
Height: 89" (2184mm)
MCR-33-101
MCR-33-101PT
Description: Pass-Thru Blast Chiller/Freezer
Length: 70" (1778mm)
Depth: 52" (1194mm)
Height: 89" (2184mm)
blank
MCR-33-102
Description: Roll-In Blast Chiller/Freezer
Length: 70" (1778mm)
Depth: 98" (2362mm)
Height: 89" (2184mm)
blank
MCR-33-102PT
Description: Pass-Thru Blast Chiller/Freezer
Length: 70" (1778mm)
Depth: 98" (2362mm)
Height: 89" (2184mm)

Downloads

Click on links below to download.

Master-Bilt Service Agent Locator
Search for a Service Agent Near You
Enter City, State or Zip Code to find agents in your area:


facebook twitter linkedin youtube