Standard Features

  • Powerful refrigeration system for faster pull-down, higher product loads and lower temperatures
  • Heavy-duty 6"-7" adjustable legs for easy cleaning underneath 
  • Two energy saving insulated doors per section allow entry into the case without exposing all the product to warmer outside air
  • Four heavy-duty, epoxy-coated cantilever shelves per section for maximum storage ability
  • Standard electronic controller for added reliability



Click on image or model number below for additional information.



Ice Cream Hardening And Holding Cabinet

  • Length: 52" (1321mm)
  • Depth: 36" (914mm)
  • Height: 82" (2083mm)*
  • Volts: 208-230**
  • Amps: 6.5
  • Unit H.P.: 1
  • NEMA Plug Configuration: 6-15P
  • Number of Shelves: 8
  • Shelf Size: 22" x 23-1/2"
  • Can Capacity (3 gal.) Storage: 43***
  • Shipping CuFt: 119
  • Weight (lbs): 840
  • Weight (KG): 382
  • Refrigerant: R-404A

Standard Features

  • Electronic controller system
  • Heavy-duty 6"-7" adjustable legs
  • 4 heavy-duty welded wire gray epoxy-coated cantilever shelves per section
  • Stainless steel front
  • Anodized aluminum sides and interior
  • 2" stainless steel foamed-in-place outer doors
  • Two staggered height, energy saving insulated inner doors per section
  • Self-closing doors with 90° hold-open feature
  • Replaceable magnetic door gaskets
  • Anti-condensate door frame heater provided through discharge liquid line
  • Refrigerant: R-404A
  • Temperature range: 0° to -37°F (-18° to -38°C)
  • UL, C-UL and NSF listed
  • Drain plumbing hookup recommended. Condensate pan available if there is no access to drain plumbing. Condensate pan must be field installed and requires a dedicated 15 amp, 120 volt circuit.
  • Warranty: Standard limited two year parts and labor with additional three year coverage on compressor part

Optional Features

  • Remote refrigeration system
  • Casters
  • Extra shelves
  • Pan rack
  • Voltage boosting transformer
  • Condensate evaporator drain pan (must be field installed and requires a dedicated 15A, 120v circuit)


*Height includes 6-7" adjustable legs.
**IHC models operate on a minimum of 208 volts. A voltage boosting transformer (part no. 39-01087) must be used when the supply voltage is less than 208 volts.
***Capacity measured in 3 gal. cans.


Click on links below to download.

Master-Bilt Service Agent Locator
Search for a Service Agent Near You
Enter City, State or Zip Code to find agents in your area:

facebook twitter linkedin youtube